KernelSU v0.9.0
应用介绍
作者: tiann
标签: v0.9.0
附件: KernelSU_v0.9.0-22-g8c44e82_11650-release.apk
[仓库同步] root-mgr: kernelsu / v0.9.0
【中文简介】
KernelSU管理器发布包。
KernelSU 现在支持通过内核模块（LKM）安装（仅限 GKI），您可以将其与官方内核或第三方内核一起使用；同时管理器还增加了安装功能，可以选择打补丁文件、直接安装、或者OTA后安装。关于新的LKM安装方法，有一些提示：
1. LKM不支持非GKI内核，以后也不会支持；
2. 修补文件时，如果`init_boot`分区存在，则应选择修补`init_boot`；否则，修补“boot”；
3、如果您已经安装了KernelSU提供的GKI内核，想要切换到LKM方式，则需要闪回原厂内核；如果你的设备有`init_boot`分区，可以直接闪回原厂`boot`；
4、GKI内核和LKM的安装方法一直存在，用哪个就用哪个喜欢;未来还将支持在管理器中刷写GKI内核。
玩得开心！
【原文】
KernelSU 管理器发布包。
KernelSU now supports installation through kernel modules (LKM) (GKI Only), you can use it with official kernels or third-party kernels; at the same time, the manager has also added installation functionality, you can choose to patch files, install directly, or install after OTA. Regarding the new LKM installation method, there are some tips:
1. LKM does not support non-GKI kernels, and will not support them in the future;
2. When patching files, if the `init_boot` partition exists, you should choose to patch `init_boot`; otherwise, patch `boot`;
3. If you have already installed the GKI kernel provided by KernelSU and want to switch to the LKM method, you need to flash back to the stock kernel; if your device has an `init_boot` partition, you can directly flash back to the stock `boot`;
4. The installation method of GKI kernel and LKM will always exist, use whichever you like; in the future, it will also support flashing GKI kernel in the manager.
Have fun!
标签: v0.9.0
附件: KernelSU_v0.9.0-22-g8c44e82_11650-release.apk
[仓库同步] root-mgr: kernelsu / v0.9.0
【中文简介】
KernelSU管理器发布包。
KernelSU 现在支持通过内核模块（LKM）安装（仅限 GKI），您可以将其与官方内核或第三方内核一起使用；同时管理器还增加了安装功能，可以选择打补丁文件、直接安装、或者OTA后安装。关于新的LKM安装方法，有一些提示：
1. LKM不支持非GKI内核，以后也不会支持；
2. 修补文件时，如果`init_boot`分区存在，则应选择修补`init_boot`；否则，修补“boot”；
3、如果您已经安装了KernelSU提供的GKI内核，想要切换到LKM方式，则需要闪回原厂内核；如果你的设备有`init_boot`分区，可以直接闪回原厂`boot`；
4、GKI内核和LKM的安装方法一直存在，用哪个就用哪个喜欢;未来还将支持在管理器中刷写GKI内核。
玩得开心！
【原文】
KernelSU 管理器发布包。
KernelSU now supports installation through kernel modules (LKM) (GKI Only), you can use it with official kernels or third-party kernels; at the same time, the manager has also added installation functionality, you can choose to patch files, install directly, or install after OTA. Regarding the new LKM installation method, there are some tips:
1. LKM does not support non-GKI kernels, and will not support them in the future;
2. When patching files, if the `init_boot` partition exists, you should choose to patch `init_boot`; otherwise, patch `boot`;
3. If you have already installed the GKI kernel provided by KernelSU and want to switch to the LKM method, you need to flash back to the stock kernel; if your device has an `init_boot` partition, you can directly flash back to the stock `boot`;
4. The installation method of GKI kernel and LKM will always exist, use whichever you like; in the future, it will also support flashing GKI kernel in the manager.
Have fun!
系统要求
KernelSU
发表评论